Optical fiber laser equipment research technology enterprise
中文 Counseling hotline：400-155-6188
The ink jet code machine used to mark the mark on the product before, but the ink jet printer has a great limitation。 The marking is not lasting, it is easy to be smeared out; the consumable material is big, it will cause great waste in the process of use, and the daily cleaning of ink has a great influence on the environment。 So many enterprises are slowly getting rid of the ink jet machine, such as the famous enterprises such as farmer mountain spring, Kangshifu, Foxconn, BYD, have already started to use laser marking machine, not only so, many small and medium-sized enterprises are also starting to use laser marking machine。 Why laser marking opportunities are so popular are mainly for the following reasons。
1、Traditional marking equipment requires high labor cost and traditional marking method is slow, so it takes a lot of manpower to keep up with the whole production schedule, and the laser marking machine is not the same, because its marking speed is very fast, it takes only a few seconds to mark the workpiece on the workpiece, remember one time。 When the client asked, he asked me that a laser marking machine could mark 1500 toys a day, and I told him that it was easy and that only one person could do it, so the laser marking machine could save the cost of manpower。
2、The operation is simple, using the laser marking machine to mark the mark on the workpiece only needs to enter the marking in the software system of the computer, then press the start button, so the requirement of the operator is not high, so it only needs to master the simple picture processing knowledge。 Because the operation is simple, the boss does not need to worry about the flow of staff again, because the time cost of retraining a worker is very low, it only takes one or two days。
3、The mark can be made because the principle of the laser marking machine is to control the trajectory of the laser by computer software, so as to use the laser to move on the workpiece surface according to the predetermined trajectory, and to burn the surface of the workpiece at the same time to expose the deep material, so the marking is durable and unacceptable。 It is easy to be tampered with, which can effectively prevent the counterfeit and shoddy products and cross regional fleeing and enhance the brand influence of the company。
1。 No consumables, low cost after use
2. Less maintenance can reduce the cost of maintenance
3。 The speed of marking is fast and the damage to products is almost nothing。
4. The marking range is wide. It can be used for common metals and alloys, rare metals and alloys, metal oxides, special surface treatment, crystal, plastic, etc.
5. For flat surfaces and camping concave convex non planes, they can be labeled
6。 Marking is more detailed。 For small marking products, the next small number and LOGO can be seen clearly。
7。 It can play tens of thousands or more per second, marking speed is convenient and fast, and it can be used for large-scale production。
广东快乐十分官网 8。 It can be used in production line, because laser can be controlled by computer with predictable range and precise speed。
9. It can make typesetting on the computer without making templates, which can reduce the processing cost.
10. The fiber laser marking machine is compact and convenient, and the occupied space of the stereo space is small.
11。 The fiber laser marking machine has a long service life and is not easy to damage。
一、The lenses are dirty and there are stains。
So long as some cotton sticks are used, some alcohol is taken on it, then the lenses of the marking machine, the beam enlargement mirror and the focus mirror are scrubbed, and the stains are removed, and the shallow problem can be solved naturally;
二、The departure of the light path
广东快乐十分官网 If this happens, we need to re adjust the optical path so as to restore it to a good state;
三、The speed of marking is too fast and the way of filling is not reasonable
In this situation, the speed of marking can be reduced, the original filling mode is adjusted, and it is necessary to determine whether the workpiece is on the top and the focus is readjusted.
广东快乐十分官网 四、The current problem of the marking machine
If the power current of the equipment is too small, it will affect the character or the depth of the pattern. At this time, the current of the laser power supply should be increased, the frequency of the marking machine is reduced, the marking machine can run normally, and the words on the standard can be avoided;
For laser marking machine, the problem of shallow typing can be solved by these methods. Of course, the good method is to prevent it when it is used. In the ordinary time, we should pay more attention to the working state of the laser marking machine and eliminate the hidden trouble before the problem appears. This is the normal use of marking machine, if there are other problems in production and processing.